Double Glazing Lock Repairs
The best locks for your doors and windows will stop burglars from getting into your home. They usually don't want to break glass or attempt to squeeze through open windows.
Some double glazing owners, however, have experienced problems with their window or door lock after the installation. Fortunately, these issues are often fixable without having to purchase new double glazing.
Broken or damaged locks
If your uPVC door or window lock is broken or faulty and requires a locksmith, they can fix it for you. They can fix hinges, striker plates and locks for your double glazing. They will also be able to adjust the cylinder's position to fix any misalignment issues that may be causing your handle to not operate correctly.
If the key fits inside the lock but doesn't turn or is difficult to insert then the mechanism may be stuck. This could be due to grime or dirt getting stuck inside the mechanism. If this is the case, then it is possible to clean the lock and then lubricate. It is important to use a dry lubricant, such as teflon or graphite instead of oil, which can attract dirt and stick to the interior of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should get into the mechanism, and the lock should spin easily.
Loose screws within the lock mechanism can be another cause of a faulty lock. They may loosen and break off or fall out completely and stop the lock from working properly. A screwdriver can be used to tighten these screws but it is important not to tighten them too much since this could cause damage to internal components.
A damaged lock could be dangerous for both you and your family, especially if you have small children. They can open the door without your knowledge and gain access to your home. If you're worried about the possibility that this could occur, a professional locksmith can help you secure the double-glazed doors.
Misty Glaze are a professional uPVC and double glazing company in Lancing, who can repair all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems for both uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows or doors are not always required.
Handles that are damaged or broken
As part of their overall security plan, most double-glazed windows feature a multipoint lock. This is an excellent option for those concerned with criminals who are looking for ways to gain access to your home. Ask your locksmith about antilift blocks. They can be installed alongside your existing locks and will ensure that your windows are securely closed.
Handle locks are usually damaged or fail. They are the first part that criminals will use to force open your window. The good news is that this is one of the easiest parts to repair.
Modern handles made of aluminium and uPVC have a multi-point locking mechanism called Espagnolette that is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems, again as an optional extra on new double glazed windows.
It is essential to fix a handle as soon as you can if it's damaged. A damaged handle can stop the window from closing properly and letting in a draft. It could also be a weakness that burglars who are opportunistic might exploit, putting your belongings and family at risk of being taken.
The process of repairing the damaged mechanism begins with getting access to the frame of the window and then removing the damaged handle. The gearbox can then be accessed to identify the type of gearbox used to open the handle. This will permit a replacement that matches the profile and internal window frame mechanisms.
Once the mechanism is replaced, the handle can be re-attached with the original screws - however, we generally recommend replacing them with larger ones as this will give a more secure fit. The final step is to seal the handle using a clear sealant. This will shield it from further corrosion. Once that's done, your window will be operational again and at only a fraction of the cost of replacing the entire window.
Broken or Faulty Hinges
If your windows aren't shut correctly, draughts may get in, your home's security barriers will weaken and there's an increased chance of water damage or damp. Broken or defective window hinges are a common issue and can be repaired easily.
If you have a uPVC window that won't close or open and close, it's likely that your hinges are damaged or broken and need to be replaced. While most window manufacturers require you to purchase a new window to resolve this simple issue, we're able to replace the faulty hinges and save you money.
Window hinges can often break after repeated use, or they might be damaged due to corrosion over time. If you've broken a window hinge, it is important to take precautions to avoid further damage. This means not causing the window to close or open.
You can find the right parts for your hinge by identifying the type of hinge it is. Common types of window hinges are Maco, Mila, Roto and other brands. Talk to a professional before purchasing parts that won't fit into your existing hardware. This could cause further damage.
Salford double glazing damaged hinge can be a huge problem for your uPVC windows and doors. They can be a significant source of noise, and they can also allow water to infiltrate which could damage your windows.
Verify that the pin barrels on both hinge halves are aligned. If it's not, tap the head pin using the hammer to create a shallow bend in the barrel of the hinge. This will help keep the pin in place. Then, ask a friend to hold the door as you remove the hinges and hinges from both the doorjamb and the door. Replace the hinges with those that are of the same size, and then attach the screws using glue. Finally, secure the hinges with clamps or weights while the glue sets.
After your hinges have been repaired and repaired, you should be able to put back the door and re-attach the handle. It is recommended to replace the screws with the same length of dowels as the original screw, so that they align with each other.
Broken or Faulty Glass
While uPVC windows do a great job of keeping the cold out and heat in, they can become damaged over time. This could include cracked or damaged glass as well as defective locks. If left unattended, this can turn into a major expense. It can also hurt the appearance of your home and can result in a decrease in insulation. It is essential to repair any damage promptly.
You can repair the crack in your glass by yourself if you have the appropriate tools and techniques. First, ensure that the area surrounding the glass is clean so that any shards don't injure anyone and aren't a trip hazard. After that, take away the broken glass pieces and dispose of them in a proper way. Then, put masking tape over the entire area to keep fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double-paned window it's best to prepare the glass before glueing it back in place so that you are sure you'll have enough space to finish the project.
Before applying the glue wipe the entire surface of the broken frame and glass with a a dry, clean cloth. Follow the directions for application and curing, which can vary from product to. You may need to clamp the cracked glass using clamps that are lightweight and designed to support fragile materials, depending on the angle.
Once the adhesive has fully set, carefully place the glass inside the window frame. Make sure it is in line with the frame edge and that there aren't any gaps between the glass sash and the frame. Be careful not to bend the window as it's being put back in place, as this can weaken the seal and cause condensation and water infiltration.
Contact a professional glazier, like O'Brien(r), to arrange an appointment to replace your glass if the window is completely broken. It's crucial to act fast when you notice broken glass.